
التصفية الموثوقة تبدأ بمواصفات مؤكدة.
Air/Oil Separator OT 4373
عنصر استبدال العناصر المكونة للضغط الجوي
عناصر مرشح ضاغط الهواء
OT4373 is an external flange-type oil-gas separator filter element specially designed for screw air compressors. It is mainly used to accurately intercept and recover lubricating oil mist in compresse
ويتأكد فريقنا من الأوامر بالأسعار والتوافق والتسليم.
مواصفات مؤكدة للاختيار الواثق.
احتياجات التركيب من دليل المعدات أو الوثائق الأصلية.
| ارتفاع | 256 ملم |
|---|---|
| القطر الخارجي | 212.8 mm |
| القياس الداخلي | 149.4 mm |
| وزن | 3.59 kg |
| مقياس المحيط الخارجي | 300 مم |
| تصنيف الترشيح | 0.1 ميكرون |
| OEM/ Cross Reference | 1614.4373.00,1614437300,2911.0015.00,4900252131,P525530,DC 3015 |
OT4373 is an external flange-type oil-gas separator filter element specially designed for screw air compressors. It is mainly used to accurately intercept and recover lubricating oil mist in compressed air, ensuring efficient equipment operation and clean air supply.
المهام الأساسية ومبادئ العمل
• Efficient oil-gas separation.
It adopts an Out-In filtration flow direction. When compressed air carrying high-temperature and high-pressure oil mist passes through the filter element, the multi-layer ultra-fine glass fiber coalescing media can capture submicron oil droplets smaller than 0.1 micron.
• Oil coalescence and return.
The intercepted tiny oil droplets gradually coalesce into large oil beads inside the filter media, gather in the groove at the bottom of the filter element under gravity, and are then guided back to the lubrication system of the air compressor through the oil return pipe for recycling, greatly reducing oil consumption.
Structural Design and Quality Characteristics
• High-strength collapse-resistant frame.
Both the inner and outer layers are equipped with high-strength galvanized perforated steel support screens, which can withstand the instantaneous high pressure difference during air compressor startup and high-load operating conditions and prevent deformation or damage of the filter element.
• Safe static-conductive design.
The top flange is standardly fitted with an oil-resistant composite sealing gasket, and built-in metal static-conductive rivets and M8 grounding studs, which can safely conduct away static electricity generated by friction of high-speed airflow and eliminate the risk of static ignition inside the oil-gas tank.
• Low resistance and long service life. The initial operating pressure difference is usually lower than 0.2 bar. While maintaining low energy consumption, the residual oil content in exhaust gas is stably controlled within 1 – 3 ppm.
الحواشي
أوقف النظام و أطلق الضغط قبل الإبعاد تأكيد اتجاه التدفق وإغلاق السطح قبل التركيب.
الصيانة والاستبدال
يستعاض عن عبارة " انخفاض الضغط " أو جدول الصيانة. تفتيش للتسرب وتلف الختم.
قبل الأمر
تأكيد متوسط، ومعدل التدفق، والضغط، ودرجة الحرارة، والارتباط، وحيز التركيب المتاح.
مرجع متقاطع
Information associated with this product. اتصل بنا إذا كنت بحاجة للمساعدة في تأكيد رقم الإحالة.
خيارات التنفيذ
الشحن أو نقل نقطة الخدمة. فريقنا يؤكد أفضل ترتيب يقوم على المقصد والوزن و وقت القيادة.
تم تأكيده قبل الإرسال
وبعد التحقيق، نتحقق من المواصفات، والأسعار، وحالة الإمداد قبل التسليم.
الدعم المستمر
وللاطلاع على أسئلة المواصفات أو التركيب أو الجودة، أبقوا المنتجات والمعلومات المطلوبة متاحة عند الاتصال بنا.
العراقأرسل تحقيق لهذا المنتج
Send your requirements for OT 4373 and our selection team will confirm compatibility, price and lead time.
موارد الاختيار
Need help confirming OT 4373 or comparing it with another reference? Use these selection resources before ordering.



