
التصفية الموثوقة تبدأ بمواصفات مؤكدة.
Air Oil Separator Part 72-12302-0801-23
عنصر استبدال العناصر المكونة للضغط الجوي
عناصر مرشح ضاغط الهواء
72-12302-0801-23 is a built-in high-efficiency oil-gas separator filter element specially designed for screw air compressors. It is a core consumable that guarantees the cleanliness of compressed air
ويتأكد فريقنا من الأوامر بالأسعار والتوافق والتسليم.
مواصفات مؤكدة للاختيار الواثق.
احتياجات التركيب من دليل المعدات أو الوثائق الأصلية.
| ارتفاع | 445 ملم |
|---|---|
| القطر الخارجي | 115 mm |
| القياس الداخلي | 76 mm |
| وزن | 2.5 kg |
| تصنيف الترشيح | 0.1 ميكرون |
| OEM/ Cross Reference | KD120-051,SA463MY |
72-12302-0801-23 is a built-in high-efficiency oil-gas separator filter element specially designed for screw air compressors. It is a core consumable that guarantees the cleanliness of compressed air and the oil circuit circulation of the unit.
Core Advantages and Value
• Reduced oil consumption.
The residual oil content of the exported compressed air is controlled within 1~3 ppm, which significantly cuts lubricating oil loss and replenishment costs.
• Energy saving and consumption reduction.
Low initial pressure difference (≤ 0.02 MPa) and low airflow resistance help reduce the operating power consumption of the air compressor.
• Protection of downstream equipment.
It effectively prevents oil from entering dryers, precision filters and pneumatic actuators, extending the service life of the entire air source system.
Core Structure and Materials
• Multi-layer ultra-fine glass fiber filter media.
Imported composite glass fiber is adopted as the core filtration layer, featuring high dust holding capacity and oil mist capture efficiency, which can effectively intercept tiny oil droplets at the 0.1-micron level.
• High-strength rust-proof frame.
High-strength perforated metal support meshes are fitted on both inner and outer layers to withstand instantaneous pressure fluctuations during unit start-stop, loading and unloading, preventing the filter element from deformation or breakdown.
• Anti-static sealing design.
High-temperature resistant sealing gaskets and anti-static flow guide pieces (or conductive pins) are equipped on the flange end cover to avoid static accumulation caused by friction of high-speed airflow and improve the operation safety inside the oil-gas separation tank.
الحواشي
أوقف النظام و أطلق الضغط قبل الإبعاد تأكيد اتجاه التدفق وإغلاق السطح قبل التركيب.
الصيانة والاستبدال
يستعاض عن عبارة " انخفاض الضغط " أو جدول الصيانة. تفتيش للتسرب وتلف الختم.
قبل الأمر
تأكيد متوسط، ومعدل التدفق، والضغط، ودرجة الحرارة، والارتباط، وحيز التركيب المتاح.
خيارات التنفيذ
الشحن أو نقل نقطة الخدمة. فريقنا يؤكد أفضل ترتيب يقوم على المقصد والوزن و وقت القيادة.
تم تأكيده قبل الإرسال
وبعد التحقيق، نتحقق من المواصفات، والأسعار، وحالة الإمداد قبل التسليم.
الدعم المستمر
وللاطلاع على أسئلة المواصفات أو التركيب أو الجودة، أبقوا المنتجات والمعلومات المطلوبة متاحة عند الاتصال بنا.
العراقأرسل تحقيق لهذا المنتج
Send your requirements for 72-12302-0801-23 and our selection team will confirm compatibility, price and lead time.
موارد الاختيار
Need help confirming 72-12302-0801-23 or comparing it with another reference? Use these selection resources before ordering.



